Wingboard 4-in-1 Inflatable

SUP – Windsurf – Wing Surf – Wing Paddling

Wingboard 4-in-1 Inflatable

SUP – Windsurf – Wing Surf – Wing Paddling

Ideal for those who want to learn to handle a FreeWing in the water without the use of a foil. The wide nose and tail provide enough stability, while the length and parallel rails generate the glide and speed.

The board comes with a removable mast base for windsurfing, rail edges for better release, and a carry strap that can also be used as a paddle holder.

JUMP TO SECTION:
JUMP TO SECTION:

ALL YOU WANT AND MORE

WELDED RAIL TECHNOLOGY

• Every Starboard inflatable paddle board features welded rails.
• The Welded Rail Technology creates a complete airtight, mechanically bonded seam without the risk of glue weakening over time. This makes Starboard inflatable paddle boards stronger and longer lasting.

THE WIDE NOSE AND TAIL

Provide you with enough stability, while the length and the parallel rails generate the glide and speed.

NEW TWO REMOVABLE CENTER FIN BOXES

Closer to the rails for better tracking and upwind reach. Remove the boxes for an improved paddling experience without the added weight or drag. Attach the boxes and mount the supplied Drake Shallow center fins to prevent the board from drifting sideways when windsurfing and wingboarding.

2-IN-1 SHOULDER CARRY STRAP & PADDLE HOLDER

  • Velcro loops to attach your paddle.
  • Easier to carry as the board simply hangs effortlessly on the shoulder and frees up your hand to multi-task, hold your coffee, or phone.
  • When not in use, the strap sits flat on the board so it doesn’t drag in the water.

FOOTSTRAP INSERTS

Make it easy to know where to position the feet and always be in the right spot to trim the board.

FULL POWER PLANING

Our Wingboard 4-in-1 Inflatables feature our 3D Rail Edge technology, a proprietary 3D elastomer compound that follows the contours of the board and creates a release edge that allows the boards to fully plane yet fold and roll up. Thanks to this 3D Rail Edge, you can accelerate and enjoy the most exciting planing sensation possible on an inflatable board.

REMOVABLE MAST TRACK

For a flat deck in the paddle board mode.

NEW DROP FIN BOX

  • The outline improves the hydrodynamic efficiency of the box and reduces its drag by 50%.
  • Smart reinforcements reduce the weight by 10%.

BUNGEE TIE DOWN

  • A bungee tie down in front of the board, for storing gear and supplies.
  • The bungee is attached with 4 D-rings which can be used to clip on your bags and gear.

RE-COVER BAG

LIGHT, STRONG, LARGE

  • Is designed to minimize weight, yet maximize comfort and strength.
  • Roller wheels available on every bag make it more comfortable for a long walk.
  • Hiking strap is ergonomically curved to ensure good stability on the shoulders.

FREE LIGHTWEIGHT LEASH

  • At only 70g, the leash is incredibly light.
  • Soft cushioning means it will flatten when stood on.
  • Easy to attach to the leash ring without needing any excess rope loop.

PUMP INCLUDED

FAST, EASY, AND COMFORTABLE

  • Fixed hose and manometer position when inflating.
  • 10% more efficient thanks to the redesigned piston and outside tube for the air outlet. Plus, double and single action pumping modes and wider foldable foot base increases stability when pumping.
  • The base and handle are made from upcycled fishing nets.

STRAIGHTER CHANNEL

Improves straight-line tracking, allowing you to paddle straighter on one side for longer.

FLAT SIDE PLANE

• Creates smoother glide and adds stability.

• Feel more controlled and less twitchy when switching between strokes.

Board Constructions

ⓘ Swipe over the board to see the bottom view

ZEN CONSTRUCTION

BEST VALUE, WELDED, AND LIGHTEST

  • With only the best core essentials. Built with single layer Linear dropstitch making it even lighter and stiffer than before. This Linear knitted dropstitch was developed by Starboard with its supplier for Starboard use ONLY.
  • The Heat Welded rails create a complete airtight, mechanically bonded seam without the risk of glue weakening over time. Making the board stronger and last longer.
  • Galvanized 2000D rails increase strength and stiffness.
LEARN MORE

WHAT'S IN THE BOX?

What’s included varies between board models & constructions

FAQ's

Got a question about this model? See the FAQ’s to learn more

← Scroll sideways for more sizes →

Model10'4" x 32"
Rider Weight45-105 kg
Length10'4" / 315 cm
Width32" / 81.3 cm
Thickness6" / 15 cm
Tail Width20.6” / 52.3 cm
Volume310 L
Foot strapIncluded
Fin Set UpSUP: Single
WS: 3 fins
FinsBack: 8"
Center: Drake shallow 220
Weight10.8 kg (Avg.)

Board weight tolerance: +/- 5%

For every board Starboard plants 3 mangrove trees with Worldview International Foundation.

Each tree absorbs 673kg of CO2 during its first 25 years.

50% of absorption goes towards offsetting this board & 50% is secured as carbon credits to fund livelihood projects in Myanmar.

The average emission from a Starboard board is 100 kg CO2.

By planting 3 trees per board we offset this 10 x over.

1.4 kg of trash is collected per board by starboard pop crews at beaches in thailand & myanmar.

Globally, an individual is responsible for 1.4 kg of plastic reaching the ocean every year.

Starboard balances this amount for our customers.