River Inflatable

THE PADDLE BOARD FOR PERFORMANCE WHITEWATER SUP

We’ve built a paddle board that’s ready to take on the rivers and rapids.

Enough tail kick to turn easy and plenty of nose kick to handle steep drops. When you go down the stream, you may hit some rocks and smash some boulders, so we have your board protected with double skin technology layer and an extra sturdy fixed long low profile middle fin, that will be happy to take some punishment.

 

Jump to section: Key Features / Constructions / Available Sizes / Specifications Table

KEY FEATURES

WELDED RAIL TECHNOLOGY

  • Every Starboard inflatable paddle board features welded rails.
  • The Welded Rail Technology creates a complete airtight, mechanically bonded seam without the risk of glue weakening over time. Making the board stronger and last longer.

THE OUTLINE SHAPE

WIDE AND SQUARE NOSE

Improves stability to handle bigger drops and helps the board pop back up from nose diving.

CURVED ROCKER LINE

Raised nose rocker limits the nose diving and catching during turns. Tail kick helps to lift the nose during turns and change direction with ease.

TRACK & SLIDE CENTER FIN
AND GLUE ON 2.6″ SIDE FINS
  • The new Track&Slide center fin for river boards has a lower angle of attack and a longer surface, which enables a more steady and easy ride over the rocks.
  • Its thick profile makes it more resistant against boulder smashes. And thanks to its long profile it is easier to track the board down the stream whilst still being maneuverable.
STANDING TRAY

The built up EVA sidewalls allow riders to use the slightly elevated rails to wedge their feet for additional support in tough conditions. They are now longer to provide that extra stability necessary under tough conditions.

MULTIPLE CARRY HANDLES

Multiple reinforced carry handles on all corners of the board for easy climbing back onto the board.

BUNGEE TIE DOWN
  • A bungee tie-down in front of the board, for storing gear and supplies.
  • The bungee is attached with 4 D-rings which can be used to clip on your bags and gear.
DIAMOND GROOVED EVA PAD

Diamond grooved deck pad provides comfortable grip, control and increases traction with less risk of slipping off when wearing footwear.

V8 PUMP
EFFICIENT DOUBLE ACTION SYSTEM
  • Inflate your board faster and easier with continuous pumping cycles in both downward and upward action.
  • With a switch, the double action becomes single action for easy inflation to 15-18 PSI. Comes with the Tiki Gauge to know your inflatable board’s pressure.
RE-COVER BAG
LIGHT, STRONG, LARGE
  • Is designed to minimize weight, yet maximize comfort and strength.
  • Roller wheels available on every bag make it more comfortable for a long walk.
  • Hiking strap is ergonomically curved to ensure good stability on the shoulders.

BOARD CONSTRUCTIONS

Swipe over the board to see bottom view

DELUXE DOUBLE LAYER

BUILT FOR A ROCKY RIDE

We have taken the stiffest uni-directional dropstitch and reinforced it with a complete second layer of laminated fabrics. In this way we have achieved the best combination of light and stiff dropstitch with the extra scratch and rip resistance of the added second layer, both on the deck and the bottom of the board. In addition, the rails sport the full 2000D outer reinforcement.

*10’11” x 31″ comes in normal Deluxe construction

DELUXE CONSTRUCTION

STIFFER, LIGHTER, MORE RESPONSIVE
  • The Fusion Woven dropstitch makes the Deluxe boards extra strong and stiff.
  • The Welded Rail Technology creates a complete airtight, mechanically bonded seam without the risk of glue weakening over time. Making the board stronger and last longer.
  • Galvanized 2000D rails increase strength together with the 3K compression bands. (3K bands only on double chamber models)
LEARN MORE

AVAILABLE SIZES

11’0″ x 34″

Length: 11’0” / 335 cm

Width: 34” / 86 cm

This board has more glide than the 9’6” and is more stable than the 10’11”, making it a stable and fast river racer. Wide nose, inspired by the Hyper Nut, boosts stability and helps the board pop back up when submerging the nose in steep drops.

10’11’’ x 31’’

Length: 10’11” / 333 cm

Width: 31” / 79 cm

Designed as the ultimate river racer for riders up to 95kg, the narrower width makes for an ultra slippery and fast shape.

9’6’’ x 36’’

Length: 9’6″ / 290 cm

Width: 36” / 91 cm

Short, compact and stable, the 9’6” is designed to manoeuvre the most technical river runs. The 9’6” accommodates up to 105kg and will take first timers from navigating basic class 1 and 2 rapids up to advanced white-water performance. A new wider and squarer shaped nose increases stability to handle bigger drops and more extreme river runs. The tail is marginally wider to give more stability when stepping back to turn. Increased nose rocker stops the nose from diving and helps safely drop into steeper runs.

PERFORMANCE CHART

SPECIFICATIONS TABLE

← Scroll sideways for more sizes →

Weight tolerance +/- 5%

Model11'0" x 34"
RIVER
10'11" x 31"
RIVER
9'6" x 36"
RIVER
Rider Weight60-115 kg50-95 kg55-105 kg
Length11'0" / 335.3 cm10'11" / 332.7 cm9'6" / 289.6 cm
Width34" / 86.4 cm31" / 78.7 cm36" / 91.4 cm
Thickness6" / 15.2 cm6" / 15.2 cm6" / 15.2 cm
Tail Width21.8” / 55.4 cm20” / 50.8 cm24" / 61 cm
Volume356 L323 L334 L
Fin Set UpThrusterThruster
Thruster
FinsCenter: Track&Slide fin
Side: 2.6"
Center: Track&Slide fin
Side: 2.6"
Center: Track&Slide fin
Side: 2.6"
Weight13.8 kg (Est.)8.4 kg (Est.)13.2 kg (Est.)

YOU MAY ALSO LIKE

starboard-sup-stand-up-paddling-board-you-may-also-like-2021-paddle-enduro
ENDURO PADDLE
SUP SUIT
Touring Inflatable
WINGBOARD 4in1

SUSTAINABILITY