Hyper Nut Surf
The Hyper Nut Surf model offers stability from a larger board and the performance of a smaller board. This surf paddle board is a newfound love in every SUP surfer’s quiver, it offers excitement to the most mediocre conditions. The short outline, thin rail and tail shape transform the performance.
INNOVATE YOUR RIDE
PATENTED SHAPE TECHNOLOGY
The 2022 range delivers a condensed range with subtle refinements that give you a smoother ride. The deeper tail shape combined with new fin angles give you more grip and bite through turns, while the narrower rounded nose is less likely to catch through turns.
NEW NARROWER ROUNDED NOSE
Limits you catching the nose through turns and is easier to paddle out through white water.
WIDE AND SHORT NOSE OUTLINE
• Increases stability and speed on the wave as you can engage the entire rail length.
• Easier to pivot turn & fit into smaller sections of the waves.
• Extra stability and pop when paddling out over whitewater.
THE INVERTED NUT RAILS
Provide insane acceleration and a pivot point for tight turning.
STRAIGHT OUTLINE
EXTENDS THE WATERLINE
• Providing speed that is comparable to a longer board.
• A curved outline has less rail engaged at one time.
NEW DEEPER SWALLOW TAIL
Gives you more bite through the turns.
NEW SLIGHT HIP TAIL
Act as a pivot point to drive through turns.
THIN RAILS TOWARDS THE TAIL
• Easier to engage the rail on the wave with less foot pressure.
• As the Hyper Nut has such a wide tail it is essential for rail thickness to be responsive in turns.
FLAT STANDING AREA
Adds stability and makes for easy rail-to-rail transitions.
FLAT ROCKER
Produces speed, helps get into waves easily and adds stability.
CHANNEL BOTTOM SHAPE
• Pro rocker down the center of the board for tight pocket turning.
• Creates a flat spot in front of the fins for extra acceleration.
NEW FIN ANGLES
The front fins have more angle helping you to engage earlier and have more grip on the wave, while the rear fins are straighter giving you more drive and speed
FIN SET UP
• 3.7 rear side fins make it much easier to slide the tail for more radical turns with less effort.
• Quad fin set up uses 4 side fins and gives fast acceleration and instant down the line speed as it does not have a drag from a centre fin.
NEW SELF-VENTILATING VALVE
A self-ventilating air valve is available on the board. This valve is self-ventilating so, it should not be touched or removed – otherwise, you are at risk of damaging the valve system.
NEW FIN ANGLES
The front fins have more angle helping you to engage earlier and have more grip on the wave, while the rear fins are straighter giving you more drive and speed
FIN SET UP
• 3.7 rear side fins make it much easier to slide the tail for more radical turns with less effort.
• Quad fin set up uses 4 side fins and gives fast acceleration and instant down the line speed as it does not have a drag from a centre fin.
Constructions
BLUE CARBON
THE BEST VALUE FULL CARBON CONSTRUCTION WE HAVE EVER PRODUCED
• Top grade 150g Biaxial Carbon wraps the entire board, joining with an overlap on the deck and bottom to create a flat stringer, increasing the total breakage strength.
• 2 skins of durable fibre glass form a sandwich around the biaxial Carbon, protecting the carbon by dampening and absorbing the impact.
• The combination of twin T-stringers deck and bottom work together to increase the overall total breakage strength.
• Multiple reinforcements in the standing area, nose and tail increase impact resistance.
STARLITE
DURABLE, SCRATCH AND IMPACT RESISTANT WOVEN RAIL PROTECTION
• Ultra-durable, scratch and impact resistant woven 200g twill azure rail protection.
• The combination of twin T-stringers deck and bottom to protect against total breakage. The T-stringers are positioned close to the rail working like an i-beam to endure heavy drops and strong wipeouts.
• Starlite now features a full deck of 0.6mm Australian pine wood which is sandwiched between 2 glass outer skins, increasing the overall total breakage strength and reducing the weight due to lower resin absorption.
LIMITED SERIES
TIMELESS LOOK, SOLID PERFORMANCE
• Twin T-stringers made from glass fibre are positioned on the deck and bottom of the board close to the rail, providing a massive increase in the overall strength against total breakage in surf.
• An additional wide layer of 200g glass wraps the rails for higher strength against paddle impact and further reinforces the overall strength against buckling.
• The deck features reinforced biaxial glass and Australian pine, to resist heel dents and impact from the standing area.
• The nose and tail are wrapped in multiple layers of glass fiber for further strength on these impact zones.
Available Sizes
NEW 8’0″ x 31.5″ / 135 L
Length: 8’0” / 244 cm.
Width: 31.5” / 80 cm.
Although the longest, the 8’0” is very responsive, fast down the line and easy to rotate through turns. The narrower nose draws a smooth line through turns, while the deeper swallow tail responds with less pressure to initiate turns.
Available constructions:
• Blue Carbon
• Starlite
• Limited Series
NEW 7’4″ x 30″ / 116 L
Length: 7’4” / 224 cm.
Width: 30” / 76 cm.
The 7’4” is ideal if you weigh up to 95kg and are looking for a little more stability than the 7’2” but shorter length than the 8’0”. The 7’4” was a favorite in the testing.
Available constructions:
• Blue Carbon
• Starlite
• Limited Series
NEW 7’2″ x 28″ / 114 L
Length: 7’2” / 218 cm.
Width: 28” / 71 cm.
If you weigh up to 85kg and you want the shortest board that is easiest to whip around, the 7’2” is the board to go for. The compact size has a parallel outline to help you generate fast down the line speed to set up for slashy quick turns.
Available constructions:
• Blue Carbon
• Starlite
• Limited Series
← Scroll sideways for more sizes →
| Model | 8'0" x 31.5" | 7'4" x 30" | 7'2" x 28" |
|---|---|---|---|
| Rider Weight | Up to 110 kg | Up to 90 kg | Up to 80 kg |
| Length | 8'0" / 243.8 cm | 7'4" / 223.5 cm | 7'2" / 218.4 cm |
| Width | 31.5" / 80 cm | 30" / 76.2 cm | 28" / 71.1 cm |
| Thickness | 4.2" / 10.8 cm | 3.8" / 9.8 cm | 4.2" / 10.7 cm |
| Tail Width | 21.5" / 54.7 cm | 21.0" / 53.4 cm | 19.8" / 53.0 cm |
| Volume | 135 L | 116 L | 114 L |
| Fin Set Up | Quad | Quad | Quad |
| Fins | 5.5" / 3.7" | 4.7" / 3.7" | 4.7" / 3.7" |
| Weight | BLUE CARBON: 8.0 kg (est) STARLITE: 9.2 kg (est) LIMITED SERIES: 8.5 kg (est) | BLUE CARBON: 7.3 kg (est) STARLITE: 8.3 kg (est) LIMITED SERIES: 7.7 kg (est) | BLUE CARBON: 7.1 kg (est) STARLITE: 8.1 kg (est) LIMITED SERIES: 7.5 kg (est) |
You May Also Like
The Hyper Nut SUP Surf has an average carbon footprint of 87 kg per board. More detail about the Hyper Nut SUP Surf’s carbon footprint Click Here >
The Hyper Nut SUP Surf has an average plastic content of 5 kg per board. More detail about the Hyper Nut SUP Surf’s plastic content Click Here >
