The Gen-R is a great fit between the flat water Sprint model and open ocean/all round All Star model. Additionally, youth riders will love this board for its speed and ease of use.
The low nose rocker and narrow nose outline help increase the acceleration and overall efficiency on flat. This acceleration is essential for tech racing, beach starts and explosive sprints after buoy turns.
The wider tail outline combined with the flat deck makes it very comfortable to move and be stable during the turn.
The narrow outline in the tip of the nose is intended to slice efficiently in flat water as well as on ocean bumps. The lower nose rocker shares genetics with the Sprint, extending the waterline for faster acceleration and prolonged glide. Although the low nose rocker aids in early bump detection, the rider must move back to trim while riding bumps.
The nose volume is designed to take on medium ocean chop and perform in technical racing, surf, and flat water. It is generally thinner than the All Star by approximately 4cm in thickness.
The deck has been designed to have a slightly lowered standing tray for stability. At the same time, the side walls are low, making beach starts and getting back on the board much easier.
The soft, round rails run the entire length of the board. This allows the board to be balanced in chop and predictable in surf and downwind. The round rails are wide for stability and balance.
The best bottom shape for a range of conditions, the flat bottom is fast in anything from surf to sprints. The flat bottom is very predictable to control in flat and ocean chop.
Features a wide tail with a sharp release. Turning is super easy on this model, and the wide tail also gives you great control in the surf.
The single center drain hole allows water from the semi-recessed deck to fully drain. Although hardly any water sits on the deck while paddling, the single center drain hole funnels excess water out of the cockpit. The recessed carbon scupper minimises any drag for a clean release.
The Gen-R is the technical/beach race specialist. Handles are modular with our screw in system to fine tune handle positioning.
The Gen-R is our first race model to feature the 10” fin box to fine tune rider fin preference. We have fitted the Gen-R with a larger box for adjustability. Short course racing would benefit from a fin further forward for fast turning, while longer races suit a fin further back in the box. Box placement varies for downwinding as some riders may prefer less or more tracking when surfing bumps.
One of the key design criteria for the Gen-R was the light weight, thinner profile technical race board. This much anticipated model is built to be a thinner model for faster acceleration, easy beach starting and great performance in surf and around buoy turns. The thinner profile also helps keep control in side wind and side chop.
Ensures a dry ride for your gear/ equipment/ luggage. Available in 14’0″ x 27″ and 14’0″ x29″
The 3k pre-impregnated carbon biax is an ultra-lightweight weave and creates super stiff performance throughout the fin. The trailing edge features a super sharp 0.4mm for clean hydrodynamics. The new range of fins adds speed and performance like never before.
Reduces paper waste while protecting your board from dust, scratches, and UV damage. Made with stretchable polyester, it fits various board shapes. Ensure optimal board maintenance with the iconic blue Board Sock, featuring a secure drawstring closure.
Ensures a dry ride for your gear/ equipment/ luggage. Available in 14’0″ x 27″ and 14’0″ x29″
The 3k pre-impregnated carbon biax is an ultra-lightweight weave and creates super stiff performance throughout the fin. The trailing edge features a super sharp 0.4mm for clean hydrodynamics. The new range of fins adds speed and performance like never before.
LIGHTEST WEIGHT, DURABILITY, FLEX CONTROL
• Super light-weight biaxial carbon is laminated over the standing area and full bottom.
• While the stronger 150g Biaxial carbon wraps the nose and rail and the best strength ratio and efficient flex.
• High-density PVC is used in the standing area and full bottom maximizing strength and long-term durability.
FULL CARBON WRAP, WOOD REINFORCED STANDING, VALUE OFFERING
• Offers a full carbon construction that combines strength and weight at a truly competitive value.
• Biaxial Carbon wraps the full deck and rail giving you excellent competitive weight and strength properties.
• Carbon stringer on the deck provides additional impact and stiffness.
• Extra glass reinforcements wrap the sharp edges and inside rails of the cockpit for extra rigidity and strength.
LIGHT, STRONG, AFFORDABLE
• Extra rigidity with the introduction of unidirectional stringer bands and solid with added rail/ nose reinforcements.
• Australian pine on the standing area for extra impact resistance and rigidity in the most critical area.
• Comes with shoulder carry strap inserts. Starboard shoulder carry strap can be purchased aftermarket.
• All inserts have added high-density foam reinforcements.
Length: 14’0” / 427 cm
Width: 29” / 74 cm
Designed for heavier riders up to 120 kg and lighter intermediate riders who want to get into the world of racing and take their performance to the next level. The 29” model is our highest volume and most stable Gen-R model, featuring an easy to use design, with a flat standing area for beach starts and easy recovery when falling in.
Available constructions:
• Blue Carbon
Length: 14’0” / 427 cm
Width: 27” / 69 cm
Designed as the “go to board” for riders up to 110 kg, the Gen-R is designed for technical and surf racing and small chop. The flat standing area lets you tackle surf and small bumps with ease, and the 27” Gen-R is a fantastic model for intermediate racers and larger riders who want to up their speed around the course.
Available constructions:
• Blue Carbon Sandwich
• Blue Carbon
Length: 14’0″ / 427 cm
Width: 25″ / 64 cm
The 25” will be one of our most popular Gen-R models because of its suitability for a range of riders in a variety of conditions. Riders up to 100 kg will love the Gen-R for surf and technical racing, small chop and semi-flatwater races. The thin profile, lightweight build is an exciting addition to the Starboard race range and is a much anticipated model for ocean and flat-water events, with faster acceleration, excellent surf performance and easy to use design for beach starts and buoy turns.
Available construction:
• Blue Carbon Sandwich
• Blue Carbon
• Lite Tech
Length: 14’0” / 427 cm
Width: 23” / 58 cm
Suiting intermediate and elite riders, the 23” Gen-R is the much anticipated model for technical racing and small chop. The thin profile, flat deck design is a much loved concept for its ease of use in beach starts, easy turning around buoys – with the wide tail design – and its versatility from light bumps, surf racing and sprints. The 23” model is the flat deck racing board of choice for riders up to 90 kg.
Available constructions:
• Blue Carbon Sandwich
• Blue Carbon
Length: 14’0” / 427 cm
Width: 21.5” / 55 cm
Our fastest Gen-R model, built in collaboration with numerous Dream Team athletes, the 21.5” is the board of choice for our world championships in small chop, technical racing and surf race events. After 7 prototypes of the 21.5” model, we have finally developed the best flat deck concept, with testing and rider feedback from numerous Dream Team riders.
Available constructions:
• Blue Carbon Sandwich
Length: 10’2″ / 310 cm
Width: 29″ / 74 cm
The lightweight and shorter length offer easier maneuverability and fast turning. Narrow width improves tracking from being able to hold the paddle straighter in the water.
Available construction:
• Starshot Tikhine
← Scroll sideways for more sizes →
| Model | 14'0" x 29" | 14'0" x 27" | 14'0" x 25" | 14'0" x 23" | 14'0" x 21.5" |
|---|---|---|---|---|---|
| Rider Weight | Up to 120kg | Up to 110kg | Up to 100kg | Up to 90kg | Up to 80kg |
| Length | 14'0" / 426.7 cm | 14'0" / 426.7 cm | 14'0" / 426.7 cm | 14'0" / 426.7 cm | 14'0" / 426.7 cm |
| Width | 29" / 73.7 cm | 27" / 68.6 cm | 25" / 63.5cm | 23" / 58.4 cm | 21.5" / 54.6 cm |
| Thickness | 9.5" / 24.1 cm | 9.6" / 24.3 cm | 9.4" / 23.8 cm | 9.4" / 23.8 cm | 9.6" / 24.3 cm |
| Tail Width | 16.6" / 42.2 cm | 16.4" / 41.7 cm | 15.5" / 39.3 cm | 15.0" / 38.9 cm | 14.7" / 37.4 cm |
| Volume | 356 L | 337 L | 317 L | 296 L | 282 L |
| Fin Set Up | Single | Single | Single | Single | Single |
| Fins | Flash+ | Flash+ | Flash | Flash | Flash |
| Weight | Blue Carbon: 14.8 kg (Est.) | Blue Carbon Sandwich: 13.0 kg (Est.) Blue Carbon: 14.0 kg (Est.) | Blue Carbon Sandwich: 12.6 kg (Est.) Blue Carbon: 13.2 kg (Est.) Lite Tech: 14.65 kg (Est) | Blue Carbon Sandwich: 11.6 kg (Est.) Blue Carbon: 13.1 kg (Est.) | Blue Carbon Sandwich: 11.3 kg (Est.) |
Board weight tolerance +/- 5%
“Really stoked about this board. We have been missing this board in the lineup for a while and I’m really happy to have it back. It has a really nice flat rocker so, you are going to be utilizing the whole 14′ length of the board. The nose is going to slice through any chops and debris like butter”
SPRINT SUP WORLD CHAMPION
“It’s the board that I’ll be using in the technical races. It’s super stable and reacts really well to those bumps. It’s a fantastic board”
2022 LONG DISTANCE SUP WORLD CHAMPION
“The board is made for downwinding, upwinding and technical racing. It can turn really quick and not losing too much speed!”
2021 LONG DISTANCE SUP WORLD CHAMPION
For every board Starboard plants 3 mangrove trees with Worldview International Foundation.
Each tree absorbs 673kg of CO2 during its first 25 years.
50% of absorption goes towards offsetting this board & 50% is secured as carbon credits to fund livelihood projects in Myanmar.
The average emission from a Starboard board is 100 kg CO2.
By planting 3 trees per board we offset this 10 x over.
The Gen-R has an average carbon footprint of 159.5 kg per board.
1.4 kg of trash is collected per board by starboard pop crews at beaches in Thailand & Myanmar.
Globally, an individual is responsible for 1.4 kg of plastic reaching the ocean every year.
Starboard balances this amount for our customers.
The Gen-R has an average plastic content of 12.5 kg per board.
