Team Inflatable

MAKE SUP A FAMILY SPORT

 

Whether you want to compete in events, train with your team, or just paddle with friends and family, the Team Inflatable Paddle Board range has a board for all. It’s a perfect tool for schools and clubs to create team building, corporate events, and parties to engage more people on the water. Multiple handles and inflation valves so, all team members can help carry and pump up the board. The added mast inserts and side fins allow you to have both the fun of paddling and windsurfing.

 

Jump to section: Key Features  /  Constructions  /  Available SizesSpecifications Table

KEY FEATURES

HEAT WELDED RAILS

  • Every Starboard inflatable paddle board features welded rails.
  • The Heat Welded rails create a complete airtight, mechanically bonded seam without the risk of glue weakening over time. Making the board stronger and last longer.

WINDSURF INSERTS

PADDLE BOARDING + WINDSURFING

Added mast inserts and side fins allow you to have both the fun of paddling and windsurfing and share the time with your friends and family.

PVC REINFORCEMENTS
  • At the bottom side of the nose and the detail increase the scratch resistance of the board and make it last longer.
  • Only on Starship All Water and Starship Family.
MULTIPLE HANDLES AND AIR VALVES

All team members can help carry and pump up the board.

BUNGEE TIE DOWN
  • A bungee tie-down in front of the board, for storing gear and supplies.
  • The bungee is attached with 4 D-rings which can be used to clip on your bags and gear.
V8 PUMP
EFFICIENT DOUBLE ACTION SYSTEM
  • Inflate your board faster and easier with continuous pumping cycles in both downward and upward action.
  • With a switch, the double action becomes single action for easy inflation to 15-18 PSI. Comes with the Tiki Gauge to know your inflatable board’s pressure.

BOARD CONSTRUCTIONS

Swipe over the board to see bottom view

ZEN CONSTRUCTION

BEST VALUE, WELDED, AND LIGHTEST
  • With only the best core essentials. Built with single layer Linear dropstitch making it even lighter and stiffer than before. This Linear knitted dropstitch was developed by Starboard with its supplier for Starboard use ONLY.
  • The Heat Welded rails create a complete airtight, mechanically bonded seam without the risk of glue weakening over time. Making the board stronger and last longer.
  • Galvanized 2000D rails increase strength and stiffness.
  • The Double Chamber brings the inflatable boards one step closer to a hard board feeling. The Double Chamber stiffens the board significantly, thanks to the double side walls around the second chamber. This chamber also offers extra safety flotation for any emergencies.
LEARN MORE

AVAILABLE SIZES

18’6″ x 60″

STARSHIP ALL WATER

Length: 18’6” / 564 cm

Width: 60” / 152 cm

With plenty of volume and stability for up to 8 people, the pulled in nose outline and flat middle rocker delivers optimum glide and efficiency for multiple paddlers to explore, cruise and race. The curved nose rocker with nose kick offers a fun combo for a wave party as well. The added PVC reinforcements on the bottom side of the nose and tail give the extra strength needed when carrying the board around to protect it from dragging scratches.

16’0″ x 32″

TANDEM

Length: 16’0” / 488 cm

Width: 32” / 81 cm

What better way than to share the experience of SUP and/or Windsurf, than doing it together on the same board. You now can arrive at the same time, share paddle breaks, sail together, chat away and enjoy the scenery pass by. The long parallel outline makes it a super-fast two-person board, combining the speed of a race board and stability from a touring.

15’0″ x 55″

STARSHIP FAMILY

Length: 15’0″ / 457 cm

Width: 55″ / 140 cm

The new wider outline of the Starship Family gives the board greater stability and provides enough space for riders to be able to paddle standing next to each other. The flat rocker extends the glide and efficiency for maximum speed. The added PVC reinforcements on the bottom side of the nose and tail give the extra strength needed when carrying the board around to protect it from dragging scratches.

PERFORMANCE CHART

SPECIFICATIONS TABLE

← Scroll sideways for more sizes →

Weight tolerance +/- 5%

Model18'6" x 60"
STARSHIP
ALL WATER
16'0" x 32"
TANDEM
15'0" x 55"
STARSHIP
FAMILY
11'2" x 38"
VISION
Length18'6" / 563.9 cm16'0" / 487.7 cm15'0" / 457.2 cm11'2" / 340.4 cm
Width60" / 152.4 cm32" / 81.3 cm55" / 139.7 cm38" / 96.5 cm
Thickness8" / 20.3 cm6" / 15.2 cm8" / 20.3 cm6" / 15.2 cm
Tail Width34.3" / 87.1 cm16.9" / 42.9 cm28.1" / 71.420.3" / 51.6 cm
Volume1250 L475 L999 L370 L
Rider Weight900 kg200 kg450 kg50-130 kg
Fin Set UpSUP: Single
WS: 5 Fins setup
SUP: Single
WS: Thruster
SUP: Single
WS: Thruster
Single
FinsCenter: 9" Net positive
Side: Drake shallow FRN 220
Center: 9" Net positive
Side: Drake shallow FRN 220
Center: 9" Net positive
Side: Drake shallow FRN 220
Zen fin
WeightZDC: 36 kg (Est.)ZDC: 16.3 kg (Est.)ZDC: 28.0 kg (Est.)ZSC: 11.5 kg (Est.)

SUSTAINABILITY